Swix CH10X Wax Yellow 60g

Picture of Swix CH10X Wax Yellow 60g
Picture of Swix CH10X Wax Yellow 60g
Manufacturer: Swix
$17.50 SAVE 20% $17.50

Temperature range from 0°C to 10°C (32°F to 50°F). Recommended iron temp: 120°C (248°F).
A new wax for the Cera Nova X line made a slightly harder than the old CH10
Test results show that a harder wax performs better in very wet saturated snow. The adjusted hardness makes it more durable than before. Good wax for base prep and training. For racing we recommend to go with fluoro wax in this temperature area.
The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax.

Customers who bought this item also bought

T0151 Swix Fiberlene Cleaning Towel 20m x 14cm

Narrow roll of synthetic fiberlene cleaning towel. For wiping off wax following application of Swix base cleaner. 20m long roll.
$12.50 SAVE 20%

Swix T0266N Fibertex Purple Medium Coarse

T0266N Fibertex aluminium oxide (purple). To be used before waxing to remove oxidised layer, and thus open the base. Pack contains 3 pads of 110mm x 150mm. Swix Fibertex is a nylon fibre pad in which small abrasive particles are bonded to the nylon fibres with resin. The purpose of Fibertex is deburring, whereas sandpaper is designed to remove base material.
$19.50 SAVE 20%